Pompa sentrifugal multistage vertikal Seri GDLF
1. Seri pompa iki kanggo struktur vertikal, multi-level, jinis segmen, struktur kompak, tapak cilik.
2.Shaft seal minangka segel mekanik lan bisa dipilih perisakan, kurang bocor, operasi stabil lan dipercaya, lan gampang pangopènan.
3. Awak pompa nganggo struktur jinis pipa, diameter inlet lan outlet padha lan ana ing garis lurus sing padha.Bisa dipasang ing sembarang posisi pipa kaya katup.Iku trep, cepet lan stabil.
4. Kanggo nggampangake instalasi bisa milih jinis stopkontak ndhuwur, arah antarane impor lan ekspor bisa diatur kanggo syarat pangguna 0 °,90 °,180 °,270 °.
5. Yen sampeyan butuh panyerepan kejut, nyuda gangguan, sampeyan bisa nggunakake instalasi piring nyambungake lan pad isolasi geter utawa instalasi isolator geter.
6. Struktur instalasi unik banget nyuda area lantai pompa, bisa nyimpen luwih saka 40% investasi infrastruktur.
1. Pompa kaliber (mm)
2. Vertikal multi-tahap centrifugal pump
3. Bahan saka pump
4. Laju aliran titik desain (m³ / h)
5. Angkat panggung tunggal (m)
6. Pompa seri
| Katrangan | CDL (F) 1 | CDL (F) 2 | CDL (F) 4 | CDL ( F ) 8 | CDL ( F ) 16 | CDL ( F ) 32 | CDL ( F ) 42 | CDL ( F ) 65 | CDL ( F ) 120 | CDL ( F ) 150 | CDL ( F ) 200 |
| Arus Rated (m³/h) | 1 | 2 | 4 | 8 | 16 | 32 | 42 | 65 | 120 | 150 | 200 |
| Arus Rated (L/s) | 0.28 | 0.56 | 1.1 | 2.2 | 4.4 | 8.9 | 11.7 | 18 | 33 | 41.6 | 55.6 |
| Range Aliran (m³/h) | 0.4-2 | 1-3.5 | 1.5-8 | 5-12 | 8-22 | 16-40 | 25-55 | 30-80 | 60-150 | 80-180 | 100-240 |
| Maks.Tekanan (bar) | 21 | 23 | 21 | 22 | 26 | 30 | 22 | 17 | 16 | 16 | 16 |
| Daya Motor (kw) | 0.37-2.2 | 0.37-4 | 0.75-7.5 | 2.2-15 | 1.5-30 | 3.0-45 | 4.0-45 | 5.5-45 | 11-75 | 11-75 | 18.5-110 |
| Rentang T (℃) | -15 ~ +120 | ||||||||||
| Maks.Efisiensi (%) | 46 | 57 | 62 | 66 | 73 | 75 | 76 | 77 | 74 | 73 | 79 |
| Jinis | CDL/CDLF | ||||||||||
| DIN Flange | DN25 | DN32 | DN40 | DN50 | DN65 | DN80 | DN100 | DN100 | DN125 | DN125 | DN150 |
| Swara Flange | G1 | G1¼ | G1 ½ | - | - | - | - | - | - | - | - |
| Cutting Ferrule Joint | DN32 | DN32 | DN50 | DN50 | DN50 | - | - | - | - | - | - |
| Pipa Benang | ZG1¼ | ZG1¼ | ZG2 | ZG2 | - | - | - | - | - | - | - |
| Tetembungane | Tabel parameter ing ndhuwur mung bagean saka wutuh.Kanggo luwih, hubungi kita langsung. | ||||||||||
1.OEM & kemampuan kustomisasi
2.Our dhewe pengecoran (Precision casting / Sand castings) kanggo njamin pangiriman cepet lan kualitas
3.MTC lan laporan Inspeksi bakal kasedhiya kanggo saben kiriman
4. Pengalaman operasi sing sugih kanggo pesenan proyek
